Do you have any questions? Need help?Call us +48 518 075 074
The Malta awning is made to measure. When it comes to width, there are no standard sizes. The maximum width is 500 cm and the reach is 310 cm. When ordering or pricing, we always provide the total external width of the awning, including the handles. The reach is the degree of extension of the awning.
AVAILABLE DIMENSIONS:
Width: from 190 to 500cm
Reach: from 160 to 310cm
The maximum projection of the Malta terrace awning is 310 cm, this is the total size of the awning including the handles, roller beam and front beam.
| Available overhangs | 1.6m; 2.1m; 2.6m; 3.1m; |
| Maximum reach | 3.1m |
| Width | from 1.9m to 5m |
| Arms | foldable, aluminum, with springs and Flyer chain |
| Tilt angle | from 5 to 70 degrees |
| Mounting brackets | to wall, ceiling, |
| Rolling tube diameter | 70mm, 80mm |
| Half cassette option | yes |
| Construction color | white ral9010, beige ral1015, silver ral9006, brown ral8014, silver graphite FSM71319 or any other color from the ral palette for an additional fee |
| Fabric | over 100 colors, Teflon coated acrylic fabric |
| Ruffle | height 21cm, 3 patterns to choose from, can be ordered without a valance, can be quickly dismantled by pulling it out |
| Hand drive | 1.5 m long crank; 1.8m; 2.2m |
| Automatic drive | electric motor with or without emergency opening |
| Automation | key switch, control unit, remote control, wind sensor and others |
1. Installing the awning to the wall
2. Installing the awning to the ceiling
See awning installation methods
Awning Installation – Watch the Video
The awning’s design is characterized by universal handles that are also a roller tube holder, a wall and ceiling holder and an arm holder.
1. Gear
2. Gear holder side cover
3. Fixed part
4. Movable part with handle axis
5. Movable part with pin
6. Stud nut
7. Fixed part
8. Side cover
The Malta awning has two universal wall and ceiling mounts. Installation of the Malta awning is basically very simple and is limited to attaching the handles, e.g. to the wall or ceiling. The awning is fully assembled and adjusted. If necessary, we can also freely set the angle of inclination. We can also attach it without any problem to a wall insulated with e.g. Styrofoam, up to 20 cm thick.
If you want to mount the awning with an additional protective half-cassette, use standard Selt wall brackets. The Malta awning has its own extreme brackets, and the canopy itself is mounted on separate ones. In some situations, it may be necessary to cut off part of the handle so that it does not interfere with the proper installation of the awning. The lower part of the handle is then cut off.
– Adjustable tilt angle in the range of 5°–70° (wall awning), 5°–85° (ceiling awning)
– The awning has an adjustable inclination angle that we can adapt to our needs
– The maximum width of the awning is 510 cm and the projection is 310 cm
– Two extreme awning mounting brackets
– The awning can be mounted to the wall or ceiling
Malta Selt awnings have an adjustable inclination angle ranging from 5° to 70° (when mounted to the wall), from 5° to 85° (when mounted to the ceiling). Below is a step-by-step guide on how to properly adjust the awning. The operation is easy and you can do it completely on your own. Tools such as an open-end wrench, a nimbus included in the awning set and a spirit level will be useful. Just follow the drawings below and tighten or loosen the awning nuts as needed.
