TYPE A – C80 in an oval/cube cassette with guides to the inside of the cassette

In this type of installation, one common cassette is used for several blinds, and the guides are mounted inside the system.

Side cover without a slot, used when mounting guides to the inside.

Every second slat is equipped with a pin. This causes the slats to move stably along the guides.

ATTENTION!
The maximum length of the cassette in one piece is 3 m (mounting the cassette only on the guides). In the case of additional mounting of the cassette, the maximum width of the cassette is 6 m.

TYPE B – C80 in an oval/cube cassette with guides outside the cassette

In this type of installation, the supporting element of the structure are the guides that transfer the weight of the entire structure to the spacer brackets.

Side cover with a slot used when mounting guides outdoors.

Every second slat is equipped with a pin. This causes the slats to move stably along the guides.

Exterior Venetian Blinds C80 Cube Selt

Application:
Exterior Venetian Blinds C80 was designed for use outside residential and office buildings.
Product characteristics:
– They are intended for external installation on window openings, facades and glazing.
– They limit the access of sunlight to the room.
– They increase the share of scattered light in the room.
– They protect the room from overheating, thereby contributing to improved thermal comfort in rooms.
– They allow you to reduce the costs related to air conditioning of rooms.
– Main rail housing via extruded aluminum cassette.
– Easy increase of the basic height of the cassette with extruded walls (100 or 160 mm)
– Strip guides made of extruded aluminum.
– Option to create any number of modules.
– Possibility of installing guides inside or outside the side covers of the cassette.
– C-shaped lamellas with rolled edges provide them with higher stiffness and durability.
– Smooth control of the slat angle allows for easy regulation of light intensity.
– Pins made of zinc and aluminum alloy.
– Textile elements made of polyester, thermally fixed, resistant to stretching, abrasion and UV rays.
– Ladders reinforced with aramid.
– They limit the penetration of noise into the building interior.
– They do not emit toxic substances during operation.
– The noise emissions of motorized blinds and external blinds are not considered to pose a significant risk to health and safety.
– The motors have a housing protection class of IP 54. The design of the product and the drive allows the curtain to be safely stopped at any height in the up-down working area and remain suspended there.
– Up and down movement is done by electric switch or remotely by remote control.
– The covers of moving parts have been designed and manufactured in a way that ensures the safety of operators, assuming that they are used correctly.
– Electric or manual (crank) drive.
– Colors: RAL, FSM.

TECHNICAL PARAMETERS – Exterior Venetian Blinds C80 Cube – Technical Data
Maximum width: 4.5 m
Maximum height: 4 m
Maximum area: up to 9 m2,
Slat width: 80.4 mm
Lamella height: 12.4 mm
Lamella thickness: 0.4 mm
Cover cassette height: 240, 330, 390 mm
Rear cassette width (+ rear mounting groove): 146 mm (+6.5 mm)
Electric drive, engine with parameters:
– supply voltage
230 V ~ 50 Hz – power
from 93 W to 230 W (depending on the engine type)
– current consumption from 0.4 A to 1.0 A (depending on the engine type)
– protection level IP 44, IP54
– continuous operation time from 4 to 6 minutes
– torque from 6 to 20 Nm
– rotational speed from 24 rpm to 26 rpm (depending on the engine type)
– operating temperature From -10°C to + 40°C
DECLARED PERFORMANCE PROPERTIES (EXTERNAL) –
Declaration of Performance 72 / ŻF / 2018
Wind load resistance class 3 (150Pa)
Additional thermal resistance ∆R 0.0
Total solar energy transfer coefficient gtot 0.01 – 0.90*

* shutter from the outside with reference glazing type C according to EN14501:2005; detailed data depending on the color of the slats are provided in a table on the Manufacturer‘s website