Exterior Venetian Blinds Z90 Selt

Application:
The Z90 blind was designed for use outside residential and office buildings.
Product characteristics:
– They are intended for installation on window openings.
– They limit the access of sunlight to the room.
– They increase the share of scattered light in the room.
– They protect the room from overheating, thereby contributing to improved thermal comfort in rooms.
– They allow you to reduce the costs related to air conditioning of rooms.
– They limit the penetration of noise into the building interior.
– They do not emit toxic substances during operation.
– The noise emissions of motorized blinds and external blinds are not considered to pose a significant risk to health and safety.
– The motors have a housing protection class of IP44 or IP 54 (depending on the motor type).
– The design of the product and the drive allows the curtain to be safely stopped at any height in the up-down working area and remain suspended there.
– Up and down movement is done manually using a crank, using an electric switch or remotely using a remote control.
– The covers of moving parts have been designed and manufactured in a way that ensures the safety of operators, assuming that they are used correctly.
– Electric or manual (crank) drive.
– Colors: RAL, FSM.

TECHNICAL PARAMETERS – Exterior Venetian Blinds Z90 – Technical Data
Maximum width: 4.5 m
Maximum height: 5 m
Maximum area (for crank drive): up to 9 m2,
Slat width: 93.4 mm
Slat height: 12.9 mm
Height of cover sheets: 200, 250, 300, 340, 390, 440 mm
Width of cover sheets: 128 mm
Electric drive, engine with parameters:
– supply voltage
230 V ~ 50 Hz – power
from 93 W to 230 W (depending on the engine type)
– current consumption from 0.4 A to 1.0 A (depending on the engine type)
– protection level IP 44, IP54
– continuous operation time from 4 to 6 minutes
– torque from 6 to 20 Nm
– rotational speed from 24 rpm to 26 rpm (depending on the engine type)
– operating temperature From -25°C to + 70°C
Hand drive: Crank:
Length: 2/3 of the system
Construction color RAL, VSR, FSM
Outdoor use
DECLARED PERFORMANCE PROPERTIES (EXTERNAL) –

Wind load resistance class 4 (250Pa)
Additional thermal resistance ∆R 0.0
Total solar energy transfer coefficient gtot 0.01 – 0.90*