Do you have any questions? Need help?Call us +48 518 075 074
The wood of the structure is a variety of spruce. It is a special construction wood with a certificate and a defined strength class C24 according to. standards: KVH EN 15497. Moreover, it is kiln-dried, humidity is 15% (+-3%), it is planed on four sides, and all edges are chamfered on four sides.
S=total width of the pergola (50-500cm)
W=overhang of wooden pergola (50-400cm)
H=height of pergola supports
H standard=260cm (This is the dimension of the support itself without the mounting anchor).
Up to a width of 5.1 m, the pergola has 4 supports.
S = total width of the pergola (501-700cm)
W = overhang of a wooden pergola (50-400cm)
H=height of pergola supports
H standard=260cm(This is the dimension of the support itself without the mounting anchor).
The structure above 5.11 m is supported on 6 supports.
The wood of the structure is a variety of spruce. It is a special construction wood with a certificate and a defined strength class C24 according to. standards: KVH EN 15497. In addition, it is kiln-dried, humidity is 15% (+-3%), it is planed on four sides, and all edges are chamfered on four sides.
Get a quote for your Pergola – Click Here
Watch Installation Video – Click Here
Below we present the spacing and number of beams depending on the width of the structure. There may be 2 to 5 rafter beams. If necessary, we can individually adjust and configure each structure as needed. Do you need more beams or beams with unusual cross-sections? It’s not a problem. Contact us and we will adapt the structure to your needs.
Massive wooden structure consisting of elements.
Massive and stable beams with a large cross-section of 14x14cm and 14x8cm
Milling done digitally
The support beam and the internal roof beam are milled wedge-shaped and oval
Wedge milling “push and screw”
Lap system for connecting pergola corners
Wedge and oval milling
The optional sliding fabric roof is an interesting option for slightly hotter days.
Lap system for connecting pergola corners
Wedge and oval milling
List of beams for an example size of 4x3m:
Support beams – 4 pcs.
Longitudinal frame beams – 2 pcs.
Internal frame beams – 5 pcs.:
including 2 pcs. beam with flat wedge system and 3 pcs. with wedge milling.
The main external beams (Support beams) are connected using an overlapping connection system. Beams with a cross-section: 14x14cm.
Internal frame beams with wedge milling. Beams with a cross-section: 14x8cm.
