Do you have any questions? Need help?Call us +48 518 075 074
Exterior Venetian Blinds Z90L – is an external sunshade, mounted to the recess above the window, in which the raising and lowering of the slats, made of aluminum strips, is carried out using an electric mechanism with a drive system connected to the control device or manually activated using a mechanism with a crank. The slats are placed on cable guides.
See information about guide holders
See information about cover plates
Price Exterior Venetian Blinds Z90L
1 – Main rail
2 – Set of cover plates (here: type 1)
3 – Side cover of the cover plate
4 – Main holder of the cover plate
5 – Cable guide (3 mm diameter)
6 – Fixing the wall tensioner
7 – Cable guide tensioner (wall-mounted, optional: floor-mounted)
8 – Z90 lower beam
9 – Z90 pen
10 – Loop ladder
– Pen profile
– Bottom beam profile
– Bottom beam cap
* Attention! Blinds with cable guides are made with slats whose width is 20 mm smaller than the given total width of the system. So as to minimize the possibility of the slats rubbing against the side walls during operation for recess installation.
H – Total height of the blinds
h – Height of the cover plate
Package height (from 190 to 440mm)
– Auxiliary handles 125-390mm
– Main sheet metal holder
– Main adjustable sheet metal handle
– Standard without additional handles on the main rail holder. Ceiling mounting on a standard bracket
– On additional main handles. Wall or ceiling mounting on a standard bracket attached to the main bracket of the cover sheet
As standard, blinds on cable guides use a standard handle (optionally, a spring handle can be used)
The blinds are controlled manually. The manual control side is selected when viewed from inside the room. When controlling external blinds from the room, a wall grommet is used.
The blinds can be controlled wired or wirelessly using an electric drive. The cable is approximately 2 meters long and located approximately in the center of the system. It can be connected either on the right or left side of the blind.
See information about drives See information about automation
Application:
The Exterior Venetian Blinds Z90 L system was designed for use outside residential and office buildings.
Product characteristics:
– Mounted outside the building, activated by a connected electromechanical drive
with the control device.
– Mounted outside the building, manually activated using a crank mechanism.
– They are intended for installation on window openings.
– They limit the access of sunlight to the room.
– They increase the share of scattered light in the room.
– They protect the room from overheating, thereby contributing to improved thermal comfort
in rooms.
– They allow you to reduce the costs related to air conditioning of rooms.
– They limit the penetration of noise into the building interior.
– They do not emit toxic substances during operation.
– The noise emission of motorized blinds and external blinds is not considered to pose a significant risk to health and
safety.
– The motors have a housing protection class of IP44 or IP 54 (depending on the motor type).
– The design of the product and drive allows the curtain to be stopped safely at any height in the work area
up and down and staying there in a state of suspension.
– Up and down movement is done manually using a crank, using an electric switch or remotely
using the remote control.
– The covers of moving parts have been designed and manufactured in a way that ensures the operators’ safety
safety provided they are used correctly.
TECHNICAL PARAMETERS – Exterior Venetian Blinds Z90L – Technical Data
Maximum width: 3.5 m
Maximum height: 4 m
Maximum area (for crank drive): up to 9 m2,
Slat width: 93.4 mm
Slat height: 12.9 mm
Height of cover sheets: 200, 250, 300, 340, 390, 440 mm
Width of cover sheets: 128 mm
Electric drive, engine with parameters:
– supply voltage
230 V ~ 50 Hz – power
from 90 W to 230 W (depending on the engine type)
– current consumption from 0.4 A to 1.0 A (depending on the engine type)
– protection level IP 44, IP54
– continuous operation time from 4 to 6 minutes
– torque from 6 to 20 Nm
– rotational speed from 24 rpm to 26 rpm (depending on the engine type)
– operating temperature From -25°C to + 70°C
Hand drive: Crank:
Length: 2/3 of the system
RAL construction color
The page is about Exterior Venetian Blinds Exterior Venetian Blinds Z90L by Seltmade to measure in accordance with the information provided during the order in the product configurator. More information can be found in the configurator or on other product subpages.
