Wind beam – maximum dimensions

The windproof profile protects the roller blind against gusts of wind and stabilizes the position of the fabric. Depending on the height of the reflector, one or two profiles can be used so that the fabric remains under constant tension. The maximum width of the profile is limited to 300cm (depending on the model).

How to install a double anti-lift beam

Anti-wind beam – installation of the double beam involves rotating the sliders relative to each other by 108 degrees in the GC30 guide, allowing the lower anti-wind beam to bypass the andywind lock.

1- upper anti-lift beam slider
2- lower anti-lift beam slider
3- guide
4- anti-lift blockade
5- anti-wind beam (anti-wind)

Concealing Facade Sun Screen 120 Selt Concealed

Application:
Sun protection and shading of vertical window openings, glazing, and space partitions.
Product characteristics:
– The system’s structure is made of extruded aluminum, which ensures the durability and strength of the reflector.
– They limit the access of sunlight to the room
– They increase the share of scattered light in the room
– Cassette made of extruded aluminum,
– Access to the revision from the front of the cassette,
– Option to create modules,
– Extruded aluminum guides or stainless steel cable guides
– For internal installation – additional bottom beam diameter 35 or FG42 is possible
– Optional anti-wind profile reducing fabric deformation under wind pressure (with product width up to 3 m)
– They protect the room from overheating, thus contributing to improving thermal comfort in rooms
– They allow you to reduce the costs related to air conditioning of rooms
– They limit the penetration of noise into the building interior
– They do not emit toxic substances during operation
– Noise emissions from motorized outdoor blinds are not considered to pose a significant risk to health and safety.
– The motors have a housing protection class of IP 44
– The design of the product and the drive allows the curtain to be safely stopped at any height in the up-down working area and remain suspended there
– Up and down movement is carried out using an electric control mechanism with a drive system connected to the control system
– The structure of the HIGH-T-TEX fabrics used effectively limits the contrasts created when sunlight enters the room
– Limits the penetration of noise into the building interior
– Powder-coated structure
– Electric drive
– colors: RAL, FSM71319

TECHNICAL PARAMETERS Concealing Facade Sun Screen R120
Maximum width: 4 m (slat), 3.5 m (cord)
Maximum height: 4 m (slat), 3 m (cable)
Maximum fabric surface area: 16 m2, (slatted), 10.5 m2 (lined)
Rolling tube diameter: 78mm
Guides: Strip: GGC30; GC30F; GC30R; GC30FD; cable – stainless steel, diameter 2.5 mm
Bottom beam: Φ42 or FG120 (external or internal), Φ35 or FG42 (interior only)
Electric drive, engine with parameters:
– supply voltage
230 V ~ 50 Hz – power
from 120 W to 145 W (depending on the engine type)
– current consumption from 0.5 A to 0.64 A (depending on the engine type)
– IP 44 protection level
– continuous operation time 4 min
– torque 10 Nm
– rotational speed from 14 rpm to 26 rpm (depending on the engine type)
– operating temperature From -10°C to + 40°C
DECLARED PERFORMANCE PROPERTIES (EXTERNAL) – Strip guides
Declaration of Performance 49 / R / 2017
Wind load resistance 1 class (48Pa)
Total solar energy transfer coefficient gtot 0.01 – 0.90*
DECLARED PERFORMANCE PROPERTIES (EXTERNAL) – Cable guides
Declaration of Performance 81 / R / 2017
Resistance to wind load 1 class (48 Pa)
Total solar energy transfer coefficient gtot 0.01 – 0.90*