Ways of installing an awning

Installation of the Palladio Selt awning: The awning is now fully screwed and adjusted. The awning is equipped with wall brackets (1) as standard. For an additional fee, we can buy brackets for the ceiling (2) or the roof rafter (3) . The assembly of the awning is basically very simple and is limited to mounting the handles, e.g. on the wall. If necessary, we can also freely set the tilt angle. The awning can also be attached without any problem to a wall insulated with e.g. polystyrene, even up to a thickness of 20 cm. The product is intended for self-assembly.

Assembly Instructions – View PDF Awning Assembly Instructions – Watch the video Manufacturer’s Assembly Instructions – Watch the video

1. Mounting the Awning to the Wall

By default, the awning blind has wall brackets on which it is attached to a vertical surface. The handles are painted in the same color as the structure. The number of pieces is adjusted to the width of the awning.

2. Ceiling mounting

The awning can also be mounted to the ceiling with a (2) ceiling bracket. It is joined (twisted) with the (1) wall bracket, which gives us one whole. The ceiling bracket requires an additional charge. The number of ceiling brackets is always the same as the number of wall brackets.

3. Mounting to the roof rafters

The terrace awning can also be attached to the roof rafters. Rafter handle (3) , join (twist) with the wall bracket (1) , which gives us one whole. The rafter holder always requires an extra charge. The number of rafter brackets is always the same as the number of wall brackets.

The photos show the same awning in two different mounting options. A wall bracket is included as standard. If we want to attach the awning to the ceiling, we need to buy a ceiling bracket 2 , which we screw with the standard bracket 1 , which gives us one whole.

1 – Standard wall mount
2 – Standard ceiling mount

The wall bracket 1 is mounted to the main beam of the awning. After it is connected to the awning beam, it must be secured with a counter screw to prevent the awning from sliding out of its holders by itself. In the place where the counter screw is visible, rectangular plugs are used to improve the aesthetics (plugs visible in the photos below).