The awning has two main dimensions on the basis of which the valuation is made. The first is the total width of the awning, and the second is the awning’s extension (extension). The required dimensions are given in cm, the production standard provides for the tolerance of the width dimensions – + 2 cm. Depending on the width of the entire structure, the manufacturer provides a different number of mounting brackets. The height of the structure depends on the selected model and it does not affect the price. The instruction for measuring the patio awning is presented in the picture on the right.

AVAILABLE DIMENSIONS:
Width: from 210 to 700 cm
Projection: from 160 to 360 cm

Evaluate the Marquise – Click Here

Palladio Selt – Mounting methods

1. Mounting the awning to the wall
2. Mounting the awning to the ceiling
3. Mounting the awning to the rafters

Palladio Awning – Types of handles

1. Wall brackets
2. Ceiling holders (combined with wall holders)
3. Rafter holders (combined with wall holders)

See ways to assemble the awning
Manufacturer’s Assembly Instructions – Watch the video

The number of mounting brackets (from 2 to 5) depends on the width of the awning.

The number of mounting brackets (from 2 to 5) depends on the width of the awning. The awning manufacturer sets a standard number of handles for given dimensions, if there is such a need, it is possible to use more handles. When using a chemical anchor with rods, we can easily mount the awning on polystyrene (without cutting holes in it). We recommend such a set especially for awnings with a long projection, e.g. 250 cm.

Features of the Palladio Selt patio awning

– Tilt angle adjustable from 5 ° –50 °
– The awning has an adjustable tilt angle that can be adjusted to your needs
– The maximum width of the Awning is 700 cm and the projection is 360 cm
– It is possible to mount the awning to the wall, ceiling, roof rafters

PALLADIO SELT awning tilt adjustment

The Palladio awning blind has an adjustable tilt angle between 5 ° and 50 °. Below is a step-by-step instruction on how to properly adjust the awning.
To change the angle of the awning, do the following:
– Extend the awning completely.
– Loosen the adjusting screw with the Allen key.
– Using a spanner, unscrew (increasing the angle of inclination) or tightening (decreasing the angle of inclination) the adjustment screws of the arm handles one by one.
– Tighten the adjusting screw with an Allen key.
Use a spirit level to check that the front beam is horizontal.

In case of difficulties please ask our dealer.