S – blind width

The photo shows a typical installation in a recess. To determine the dimensions of the blinds, you can use, for example, this example. WIDTH S = Measure the size of the recess and then make a small “clearance”, e.g. 0.5 cm per side. For example, the measured size of the recess is 102 cm, so from this dimension we subtract 0.5 cm per side and we get the width of the blind –i.e. 102-0.5-0.5 = 101 cm If the recess is curved, it should be taken into account always take the smallest dimension.

H – blind height

The photo shows a typical installation in a recess. To determine the dimensions of the blinds, you can use, for example, this example. HEIGHT H = Measure the size of the recess (e.g. from the top of the recess to the bottom of the window sill), and then make a small “clearance”, e.g. 0.5 cm at the top and bottom. For example, the measured dimension of the recess is 155 cm, so from this dimension we subtract 0.5 cm from the top and bottom and we get the height of the blinds – i.e. 155-0.5-0.5 = 154 cm If at the top, the recess is curve, the smallest dimension should always be taken into account.

Installation in a recess, without handles – width measurement – built-in cassette

Measurement of the width of the blinds when installed in the window recess, using a built-in cover sheet from the front. Strip guides are used, which are attached directly to the recess (to the insulation layer). When ordering, please provide the total dimension A

Venetian Blinds c80 – dimensions and depth of the cassette

Measuring the width of the blinds when installing them in the window recess. using a built-in cover sheet.

P – Height of the slat package
B – Height of the cover plate
G – Depth of main handle (12cm)
S – Length of the guide handle

Venetian Blinds z90 – cassette dimensions and depth

Measuring the width of the blinds when installing them in the window recess. using a built-in cover sheet.

P – Height of the slat package
B – Height of the cover plate
G – Depth of the main handle and cover plate (14cm)
F – Insulation layer, e.g. 1-2 cm
S – Length of the guide handle
R – A layer of insulation, e.g. 1-2 cm, glued to the front of the cover sheet

Venetian Blinds z90 – cassette dimensions and depth

Measuring the width of the blinds when installing them in the window recess. using an unbuilt cover sheet.

P – Height of the slat package
B – Height of the cover plate
G – Depth of the main handle and cover plate (12cm)
S – Length of the guide handle

Installation of blinds in modular versions

Width measurement during modular installation in the window recess – Installation of external guides directly to the side of the facade. Installation of the central guide to the window frame using the telescopic handle.

Width measurement

WIDTH Ai.e. the outer, extreme dimension of the blinds with guides (up to the central axis of the guide)
WIDTH B i.e. the outer, extreme dimension of the blinds with guides (up to the central axis of the guide)
S WIDTH, i.e. the outer, extreme dimension of both blinds with guides. This is the width of the entire module (in this case a double module, composed of two blinds)

Handles used:

Type 2 – telescopic(for mounting the modular guide to the window frame)

• 50-70mm
• 70-105mm
• 100-170mm