1. Before you install the reflector, you will have to install it on the wall/construction. First, apply Reflexsol with guides (level), mark and drill a hole in the profile for the cable powering the drive.
2. The base profiles of the cassette should be connected to the guides by sliding the profiles onto the whiskers of the side covers

3. Install the structure frame

4. Fix the cassette (fig. 3a and 3b) and guides (fig. 3c – 3f) in a manner appropriate to the type of installation

5. A roller tube with a drive, fabric and a weight beam should be installed in the cassette.

6. Install the cassette inspection cover using the click connection, then screw the profile in place using two screws.

7. Place a PVC insert with a lock in the guide profile, inserting it into the upper part of the profile.
8. After installing Sun Screen ziip, connect the blind to the power supply. Set the upper and lower end positions (according to the motor/transmitter manual).

9. Install the profiles covering the guides using a click and appropriate screws.