See how to mount Open Roller Sun Screen
Open Roller Sun Screen XS – Components
– wall and ceiling holder
– winding tube with fabric
– lower beam
– cable tensioner
– cable guide
– cable holder
Do you have any questions? Need help?Call us +48 518 075 074
Open Roller Sun Screen XS – Technical Data
Cross-sections of lower beams and winding tubes
Open Roller Sun Screen wall and ceiling mount
Open Roller Sun Screen with cable guides or free-hanging
Open Roller Sun Screen XS can be equipped with steel cables to additionally maintain the stiffness of the fabric or be installed as a free-hanging cover, in which case the fabric is tensioned by gravity by the lower beam.
Installing the roller shutter to the wall
The wall and ceiling holder is attached to the wall, recess or window frame, and the cable guide tensioners are attached to the wall or ground.
Installing the blinds to the ceiling
The wall and ceiling holder is attached to the ceiling or recess, and the cable guide tensioners are attached to the wall or floor.
Installation of Reflexola XS with cable guides
– Wall and ceiling holder
– Wall-mounted cable tensioner
– Floor-mounted cable tensioner
Cable mounting angles
The cable guide is attached using a cable angle
Cable holders are available in various lengths and are adjustable in the following ranges:
* L = adjustable from 15-36mm (Standard length)
* L = adjustment from 29-50mm (Option – less frequently used length)
* L = adjustment from 55-76mm (Option – less frequently used length)
Floor cable tensioner
Screen blinds control
Open Roller Sun Screen can be controlled manually or electrically. The crank drive is controlled from outside or inside the room. In the case of an electric drive, the cable is approximately 2 meters long and located approximately in the center of the system. It can be connected either on the right or left side of the roller blind.
See information about manual control See information about electric control
Open Roller Sun Screen XS Selt
Application:
Sun protection and shading of vertical window openings, glazing, separation of small spaces.
Designed for indoor use
Product characteristics:
– Cassetteless product with cable guides or free-hanging
– Electric or manual drive (crank)
– Small aluminum wall and ceiling mounting brackets enable quick and simple installation of the system
– Simple design.
– Cable guides – stainless
– Possibility to use different variants of lower beams
– Prevents rooms from heating up, which significantly reduces the need to use devices
air conditioning, limits the access of sunlight and increases the share of scattered light in the room
– The structure of the HIGH-T-TEX fabrics used effectively limits the contrasts created when falling in
sunlight into the room
– Limits the penetration of noise into the building interior
– Four varieties of lower beam FG42, FP33, fi 35 or fi 42.
TECHNICAL PARAMETERS OPEN ROLLER SUN SCREEN RXS
Maximum width: 2.6 m
Maximum height: 2.6 m
Maximum fabric surface area: 6.8 m2
Rolling tube diameter: 51mm
Bottom beam: Rectangular 12×42 mm; rectangular 8.5×33.5 mm; round, diameter 35 mm or 42 mm
Electric drive, engine with parameters:
– supply voltage
230 V ~ 50 Hz – power
from 80 W to 130 W (depending on the engine type)
– current consumption from 0.4 A to 0.55 A
– IP 44 protection level
– continuous operation time 4 min
– torque from 3 to 6 Nm (depending on the engine type)
– rotational speed from 28 rpm to 30 rpm (depending on the engine type)
– operating temperature From -10°C to + 40°C
Hand drive: Crank:
180 cm long foldable crank with gimbal, anodized aluminum or with gimbal and wall connection
Construction color RAL, FSM
Fabric model According to the current price list
Internal use
Open Roller Sun Screen XS - Technical Data - Open Roller Sun Screen XS wall and ceiling mount, mounting Open Roller Sun Screen to the wall, mounting Open Roller Sun Screen to the ceiling, Open Roller Sun Screen XS cross-sections of the lower beams, cross-sections of the winding tubes, Open Roller Sun Screen