Do you have any questions? Need help?Call us +48 518 075 074

Open Roller Sun Screen XXL – Technical Data

See how to install Open Roller Sun Screen

See measurement instructions

Price Open Roller Sun Screen XXL

Open Roller Sun Screen XXL – Components

– winding tube with fabric
– winding tube holder
– lower beam
– cable tensioner
– cable guide

The Open Roller Sun Screen versions with cable guides have different components depending on the method of installation (more information in the product data sheet). The system structure and cassette are made of extruded aluminum. The design of the product and the drive allows the curtain to be safely stopped at any height in the up-down working area and remain suspended there. Electric or manual-crank reflexo drive. The motors have a housing protection class of IP 44.


Cable guide
Lower beam
Reinforcing profile
Galvanized winding pipe


Open Roller Sun Screen Installation

When mounting to the ceiling, it is possible to use a cable. Use the free-hanging option only inside the building.

Wall and ceiling holder

 


Open Roller Sun Screen with cable guides or free-hanging

Open Roller Sun Screen XXL can be equipped with steel cables that additionally maintain the stiffness of the fabric or be installed as a free-hanging cover, in which case the fabric is tensioned by gravity by the lower beam.


Installing the roller shutter to the wall

The wall and ceiling holder is attached to the wall, recess or window frame, and the cable guide tensioners are attached to the wall or ground.


Installing the blinds to the ceiling

The wall and ceiling holder is attached to the ceiling or recess, and the cable guide tensioners are attached to the wall or floor.


InstallationOpen Roller Sun Screen XXL with cable guides


Cable mounting angles

The cable guide is attached using a cable angle

Cable holders are available in various lengths and are adjustable in the following ranges:
* L = adjustable from 15-36mm (Standard length)
* L = adjustment from 29-50mm (Option – less frequently used length)
* L = adjustment from 55-76mm (Option – less frequently used length)


Floor cable tensioner


Screen blinds control

The reflectors are controlled manually or electrically. The crank drive is controlled from outside or inside the room. In the case of an electric drive, the cable is approximately 2 meters long and located approximately in the center of the system. It can be connected either on the right or left side of the roller blind.

See information about manual control See information about electric control


Open Roller Sun Screen XXL Selt

Application:
Sun protection and shading of vertical window openings, glazing, separation of large spaces. Intended for both outdoor and indoor use
Product characteristics:
– The system’s structure is made of extruded aluminum, which ensures the durability and strength of the reflector.
– Electric or manual drive (crank)
– Cassetteless product with cable guides (outside) or free-hanging (inside)
– Aluminum wall and ceiling mounting brackets enable quick and simple installation of the system
– Simple design.
– Cable guides – stainless
– Prevents rooms from heating up, which significantly reduces the need to use devices
air conditioning, limits the access of sunlight and increases the share of scattered light in the room
– The structure of the HIGH-T-TEX fabrics used effectively limits the contrasts created when falling in
sunlight into the room
– Limits the penetration of noise into the building interior
– Three varieties of the FG42 bottom beam, diameter 35 (inside) or diameter 42 (outside).

TECHNICAL PARAMETERS OPEN ROLLER SUN SCREEN RXXL
Maximum width: 3 m (outside), 4.5 m (inside)
Maximum height: 3 m (outdoor), 5 m (indoor)
Maximum fabric surface area: 9 m2 (outdoor), 22.5 m2 (inside)
Rolling tube diameter: 70/78mm
Bottom beam: Rectangular 12×42 mm or round with a diameter of 35 mm or 42 mm (outside)
Electric drive, engine with parameters:
– supply voltage
230 V ~ 50 Hz – power
from 120 W to 145 W (depending on the engine type)
– current consumption from 0.5 A to 0.64 A (depending on the engine type)
– IP 44 protection level
– continuous operation time 4 min
– torque 10 Nm
– rotational speed from 14 rpm to 26 rpm (depending on the engine type)
– operating temperature From -10°C to + 40°C
Hand drive: Crank:
Foldable, 180 cm long, with cardan joint and wall connection, anodized aluminum
Construction color RAL, FSM
Fabric model According to the current price list
External/Interior use
DECLARED PERFORMANCE PROPERTIES (EXTERNAL) – Cable guides
Declaration of Performance 60 / R / 2017
Wind load resistance 1 class (48Pa)
Total solar energy transfer coefficient gtot 0.01 – 0.90*


Open Roller Sun Screen XXL - Technical Data Open Roller Sun Screen XXL - Technical Data - Open Roller Sun Screen XXL Wall and ceiling mount, mounting Open Roller Sun Screen to the wall, Open mounting Roller Sun Screen for ceiling, Open Roller Sun Screen XXL Components Open Roller Sun Screen, roller tube holder, cable tensioner, cable guide, Open Roller Sun Screen XXL Roller beam, roller tubes Open Roller Sun Screen, cable guide Open Roller Sun Screen XXL Selt dimensioning, measurement Open Roller Sun Screen, Open Roller Sun Screen dimensions

Zapisz do PDF

Trwa generowanie dokumentu, poczekaj chwilę

Back Zapisz do PDF
Your cart email sent successfully :)