Measuring instructions for Bora Selt side awning

The side awning has two main dimensions based on which the valuation is made. The first is the total width (overhang, extension of the awning, and the second is its height. Required dimensions are given in cm, the production standard provides for a dimensional tolerance of -+2cm. Each awning has its maximum construction dimensions, so in some cases it may turn out that has the option of ordering an awning with selected dimensions. Instructions for measuring the terrace awning are shown in the image below.

AVAILABLE DIMENSIONS:
Width: from 50 to 400 cm
Height: from 110 to 200cm

Quote your awning – Click Here

Handle placement – post height

The wall mounting bracket is placed at height H1, which is calculated as follows:

H1 = H/2 + 80mm

E.g. When H=1600mm, H1 is 880mm

Awning dimensions with various installation methods

– front post – installation on a hard surface
– front post mounted on soft ground
– wall mounting bracket

Side Marquee Components

1 – Cassette
2 – Cassette mounting bracket
2a – Cassette holder
2b – Cassette hanger
3 – Fabric
4 – Front beam
5 – Handle
6 – Front post (installation on a hard surface)
7 – Wall mount (wall mounting)
8 – Element for fixing to the ground (fixing to soft ground)

Side awning – Cross-section of the cassette

Side awning – Cross-section of the cassette
(dimensions without system cover)

Elements of the wall mount

1) Windbreaker Bora post L=150 mm – 1 pc.
2) KPL handle holder – 1 pc.
3) Fixed wall mount – 1 pc.
4) Screw M6x45 (DIN 912) – 1 pc.
5) Screw M6x16 (DIN 912) – 4 pcs.
6) M6 nut (DIN 934) – 1 pc.
7) Washer 6 (DIN 125-1A) – 6 pcs.
8) DSP M6 mounting insert – 4 pcs.

Wall bracket – cross-section

Locking the handle in the handle holder

The side awning is closed by releasing the handle lock and rolling it up manually until the front beam is placed in the awning cassette.

Cassette hanger and cassette mounting bracket

Side Awning Tilt Angle

– for the left side (right side also available)