The awning has two main dimensions on the basis of which the valuation is made. The first is the total width of the awning, and the second is the awning’s extension (extension). The required dimensions are given in cm, the production standard provides a tolerance of the width of – + 2 cm. Depending on the width of the entire structure, the manufacturer provides a different number of mounting brackets. The height of the structure depends on the selected model and does not affect the price. The instruction for measuring the patio awning is presented in the picture on the right.

AVAILABLE DIMENSIONS:
Width: from 200 to 530 cm
Projection: from 160 to 250 cm

Evaluate the Marquise – Click Here

Silver Plus Selt – Mounting methods

1. Mounting the awning to the wall
2. Mounting the awning to the ceiling
3. Mounting the awning to the rafters

Awning Silver Plus – Additional half-cassette

Protective half-cassette over the rolled awning winding tube

The roof is made of aluminum in the same color as the awning structure. The side covers additionally protect the rolled-up awning against weather conditions.

Awning drives have an IP 44 protection degree, which means protection against water splashes on the awning housing from any direction.

Silver Plus Selt awning – Types of handles

1. Wall brackets
2. Ceiling holders (combined with wall holders)
3. Rafter holders (combined with wall holders)

See ways to assemble the awningAwning Assembly Instructions – See the movie

The number of mounting brackets (from 2 to 5) depends on the width of the awning.

The number of mounting brackets (from 2 to 5) depends on the width of the awning. The awning manufacturer sets a standard number of handles for given dimensions, if there is such a need, it is possible to use more handles. The installation of the awning is basically very simple and is limited to attaching the handles to the wall or ceiling, for example. The awning is now completely twisted and adjusted. If necessary, we can also freely set the tilt angle. We can also attach it without any problem to a wall insulated with e.g. polystyrene, up to a thickness of 20 cm.

Characteristic features of the Silver Plus Selt patio awning

– Tilt angle adjustable from 5 ° –40 °
– The awning has an adjustable tilt angle that can be adapted to your needs
– The maximum width of the Awning is 530 cm and the projection is 250 cm
– Possible installation of the awning to the wall, ceiling, roof rafters
– The awning exposed to large gusts of wind can be equipped with telescopic supports supporting the unfolded cover.

Adjusting the angle of the SILVER PLUS SELT awning

The Silver Plus awning blind has an adjustable tilt angle in the range of 5 ° –40 °. Below is a step-by-step instruction on how to properly adjust the awning.
To change the angle of the awning, do the following:
– Fully extend the awning, find the arm holder with the adjusting screw
– Loosen the adjustment screws of the M12x100 arm holders with the Allen key.
– Loosen the M60 internal screw with an Allen key – unscrew (increase the angle of inclination) or tighten (decrease the angle of inclination) adjustment screws of the arm handles.
– Tighten the M12x100 screws with an Allen key.
Use a spirit level to check that the front beam is horizontal.

In case of difficulties, please ask our dealer.