The awning has two main dimensions based on which the valuation is made. The first is the total width of the awning, and the second is the awning projection (extension). The required dimensions are given in cm, the production standard provides for a tolerance of width dimensions of -+2 cm. Depending on the width of the entire structure, the manufacturer provides a different number of mounting brackets. The height of the structure depends on the selected model and does not affect the price. Instructions for measuring the terrace awning are shown in the image below.

AVAILABLE DIMENSIONS:
Width: from 195 to 700 cm
Reach: from 160 to 360 cm

Quote your awning – Click Here

Australia Selt – Installation Methods

1. Installing the awning to the wall
2. Installing the awning to the ceiling
3. Installing the awning to the roof rafters

Australia Selt – Types of handles

– Wall mounts
– Ceiling mounts (integrated with wall mounts)
– Rafter handles (integrated with wall handles)

See awning installation methods

The number of mounting brackets (from 2 to 5) depends on the width of the awning.

The number of mounting brackets (from 2 to 5) depends on the width of the awning. The awning manufacturer sets a standard number of handles for given dimensions; if necessary, it is possible to use more handles. Installing the awning is actually very simple and is limited to attaching the brackets, e.g. to the wall or ceiling. The awning is fully assembled and adjusted. If necessary, we can also freely set the angle of inclination. We can also attach it without any problem to a wall insulated with e.g. Styrofoam, up to 20 cm thick.

Characteristic features of the Australia Selt terrace awning

– Adjustable tilt angle from 5° to 60°
– The awning has an adjustable inclination angle that we can adapt to our needs
– The maximum width of the awning is 700 cm and the projection is 360 cm
– Possible installation of the awning on the wall, ceiling or roof rafter

AUSTRALIA SELT awning angle adjustment

The Australia awning has an adjustable tilt angle ranging from 5° to 60°. Below are step-by-step instructions on how to properly adjust the awning.
To change the awning tilt angle:
– Unroll the awning completely and find the arm holder with the adjustment screw
– Loosen the M70 screw with an Allen key.
– Using an open-end wrench, successively unscrew (increase the angle of inclination) or tighten (decrease the angle of inclination) the adjusting screws of the arm holders.
– Tighten the M70 screw with an Allen key.
Use a spirit level to check whether the front beam is horizontal.

If you have any difficulties, please ask our seller.