Do you have any questions? Need help?Call us +48 518 075 074

Opatex fabrics for pergolas – Fabric Sample

Flame-retardant, waterproof, three-layer fabric, impermeable to light, protecting against overheating

The 850gr/m2 fabric retains its resistance for many years. The fabric is resistant to weather conditions due to its black inner double coating. The embossed finish on the inside gives the fabric a textile look and a dynamic surface effect. Anti-dust PU exterior. Two different shades on the outside and inside allow the colors to match the surrounding structures. The cream or white interior provides a brighter space underneath the structure. Flame-retardant material. 5 years warranty.

Fabric Specification:

Thickness: 0.65mm
Weight: ca 850g/m2
Finish:
outer side – matt PU,
lacquered inner side – mat, varnished with a waterproof layer
Tensile resistance:
warp approx. 250 DaN/5 cm, weft approx. 250 DaN/5 cm
Tear resistance:
warp approx. 25 DaN, weft approx. 20 DaN
Roll width: 300cm

Three-layer fabrics to protect against overheating:

1st layer – reflects heat,2nd layer – absorbs heat, 3rd layer – does not emit heat. Fully resistant to changing weather conditions and temperature (-30°C +70°C), 5 years warranty.

Winlux Opatex Polyester fabrics with a PVC coating with high tensile strength.


White on the outside – White on the inside 01120

Cream from the outside – Cream from the inside 02720

Light Gray on the outside – Cream on the inside 08780

Anthracite from the outside – Cream from the inside 08150

Burgundy on the outside – Cream on the inside 04440

Green on the outside – Cream on the inside 06320

Grey on the outside – Light gray on the inside

Gray-brown on the outside – Cream on the inside

Cleaning and care

Frequent cleaning is recommended to avoid migration of contaminants into the PVC. Use a soft sponge or cloth to clean. Avoid abrasive substances or devices and strong friction. Do not use a high pressure washer, ultimately a low pressure washer with cold water is allowed. Cleaning with TEXOUT APCO CLEANER, TEXOUT APCO FAST CLEANER is recommended. Use only non-ionic detergents with a low percentage of alcohol and avoid strongly alkaline or acidic detergents, highly polar solvents, oxidants such as hypochlorite or hydrogen peroxide. The detergent concentration may vary depending on the degree of dirt of the material. Occasional use of hydrocarbons such as naphtha, fuel or petroleum ether is permitted to remove grease stains. Rinse thoroughly with running water and allow the tarp or awning to dry thoroughly before folding to avoid molding. It is recommended to periodically treat the material with a specific product (TEXOUT APCO PROTECTANT) to create a protective film that also maintains brightness and durability.

 

* The faithfulness of the reproduction of individual colors on the monitor depends on the class and quality of the monitor. The fabric colors shown above are for illustration purposes only.


qqq
Zapisz do PDF

Trwa generowanie dokumentu, poczekaj chwilę

Back Zapisz do PDF
Your cart email sent successfully :)