Venetian Blinds C50L Selt

Application:
Venetian Blinds C50L was designed for use outside or inside residential and office buildings.

Product characteristics:

– They are intended for external installation on window openings, facades and glazing, as well as indoors.
– They limit the access of sunlight to the room.
– They increase the share of scattered light in the room.
– They protect the room from overheating, thereby contributing to improved thermal comfort in rooms.
– They allow you to reduce the costs related to air conditioning of rooms.
– Main rail casing through cover sheets in 2 types (1A or 4B), including for flush mounting,
– Option to create any number of modules,
– They limit the penetration of noise into the building interior.
– They do not emit toxic substances during operation.
– The flat design of the slats allows you to reduce the total height of the package
– The noise emissions of motorized blinds and external blinds are not considered to pose a significant risk to health and safety.
– The motors have a housing protection class of IP 54. The design of the product and the drive allows the curtain to be safely stopped at
any height in the up-down work area and remaining suspended there.
– Up and down movement is done by electric switch or remotely by remote control.
– The covers of moving parts have been designed and manufactured in a way that ensures the safety of operators
assuming they are used correctly.
– Electric or manual (crank) drive.
– Colors: RAL, FSM.

TECHNICAL PARAMETERS – Venetian Blinds C50L – Technical Data
Maximum width: 3 m (2.4 m – external)
Maximum height: 3 m (2.4 m – external)
Slat width: 49 mm
Lamella height: 4.5 mm
Lamella thickness: 0.4 mm
Height of cover sheets: 120, 150, 170 mm
Width of cover sheets: 102 mm
Electric drive, engine with parameters:
– supply voltage
230 V ~ 50 Hz – power
from 93 W to 115 W (depending on the engine type)
– current consumption from 0.4 A to 0.5 A (depending on the engine type)
– protection level IP 44, IP54
– continuous operation time from 5 to 6 minutes
– torque 6 Nm
– rotational speed from 24 rpm to 26 rpm (depending on the engine type)
– operating temperature From -10°C to + 40°C
Hand drive: Crank:
Length: 2/3 of the system
RAL construction color
Application: External or internal
DECLARED PERFORMANCE PROPERTIES (EXTERNAL) –

Declaration of performance: 78 / ŻF / 2016
Wind load resistance class 0 (<75 Pa)