Cover Box 1 – Components

1 – BOX1 flush-mounted cassette
2 – Inspection cover
3 – C80 slat
4 – Ladder
5 – Guide
6 – C80 lower beam

Cover Box 2 – Components of the box with insulation

1 – BOX2 flush-mounted cassette
2 – Inspection cover
3 – C80 slat
4 – Ladder
5 – Guide
6 – C80 lower beam
7 – Insulation -30 mm styrodur

Venetian Blinds C80 Box 1 Selt

Application:
Venetian Blinds C80 was designed for outdoor use in residential and office buildings.
Product characteristics:
– They are intended for flush mounting on window openings.
– They are equipped with a projection enabling external plastering.
– Cassette and guide made of extruded aluminum
– They have an inspection cover for easy access and installation.
– They limit the access of sunlight to the room.
– They increase the share of scattered light in the room.
– They protect the room from overheating, thereby contributing to improved thermal comfort in rooms.
– They allow you to reduce the costs related to air conditioning of rooms.
– They limit the penetration of noise into the building interior.
– They do not emit toxic substances during operation.
– The noise emissions of motorized blinds and external blinds are not considered to pose a significant risk to health and safety.
– The motors have a housing protection class of IP 54.
– The design of the product and drive allows the curtain to be safely stopped at any height in the up-down working area
and staying there in limbo.
– Up and down movement is done by electric switch or remotely by remote control.
– The covers of moving parts have been designed and manufactured in a way that ensures the safety of operators
assuming they are used correctly.
– Electric drive.
– Color: RAL.

TECHNICAL PARAMETERS – Venetian Blinds C80 Box 1 – Technical Data
Maximum width: 4.5 m
Maximum height: 3 m
Slat width: 80.4 mm
Lamella height: 12.4 mm
Lamella thickness: 0.4 mm
Cassette height: 220, 270, 310, 350 mm
Cassette width: 146mm + 15mm front spline
Electric drive, engine with parameters:
– supply voltage
230 V ~ 50 Hz – power
from 93 W to 230 W (depending on the engine type)
– current consumption from 0.4 A to 1.0 A (depending on the engine type)
– protection level IP 44, IP54
– continuous operation time from 4 to 6 minutes
– torque from 6 to 20 Nm
– rotational speed from 24 rpm to 26 rpm (depending on the engine type)
– operating temperature From -10°C to + 40°C
DECLARED PERFORMANCE PROPERTIES (EXTERNAL) –
Declaration of Performance 73 / ŻF / 2018
Wind load resistance class 3 (150Pa)
Additional thermal resistance ∆R 0.0
Total solar energy transfer coefficient gtot 0.01 – 0.90*

* shutter from the outside with reference glazing type C according to EN14501:2005; detailed data depending on the color of the slats are given in the table on the website
Producer‘s website

Venetian Blinds C80 Box 2 Selt

Application:
Venetian Blinds C80 was designed for outdoor use in residential and office buildings.
Product characteristics:
– They are intended for flush mounting on window openings.
– They are equipped with a projection enabling external plastering.
– They have an insulation layer on the cassette to insulate the lintel (30 mm sytrodur)
– Cassette and guide made of extruded aluminum
– They have an inspection cover for easy access and installation.
– They limit the access of sunlight to the room.
– They increase the share of scattered light in the room.
– They protect the room from overheating, thereby contributing to improved thermal comfort in rooms.
– They allow you to reduce the costs related to air conditioning of rooms.
– They limit the penetration of noise into the building interior.
– They do not emit toxic substances during operation.
– The noise emissions of motorized blinds and external blinds are not considered to pose a significant risk to health and safety.
– The motors have a housing protection class of IP 54.
– The design of the product and drive allows the curtain to be safely stopped at any height in the up-down working area
and staying there in limbo.
– Up and down movement is done by electric switch or remotely by remote control.
– The covers of moving parts have been designed and manufactured in a way that ensures the safety of operators
assuming they are used correctly.
– Electric drive.
– Color: RAL.

TECHNICAL PARAMETERS – Venetian Blinds C80 Box 2 – Technical Data
Maximum width: 4.5 m
Maximum height: 3 m
Slat width: 80.4 mm
Lamella height: 12.4 mm
Lamella thickness: 0.4 mm
Cassette height: 220, 270, 310, 350 mm
Cassette width: 191 (146 mm + 15 mm front spline + 30 mm rear insulation)
Electric drive, engine with parameters:
– supply voltage
230 V ~ 50 Hz – power
from 93 W to 230 W (depending on the engine type)
– current consumption from 0.4 A to 1.0 A (depending on the engine type)
– protection level IP 44, IP54
– continuous operation time from 4 to 6 minutes
– torque from 6 to 20 Nm
– rotational speed from 24 rpm to 26 rpm (depending on the engine type)
– operating temperature From -10°C to + 40°C
DECLARED PERFORMANCE PROPERTIES (EXTERNAL) –
Declaration of Performance 73 / ŻF / 2018
Wind load resistance class 3 (150Pa)
Additional thermal resistance ∆R 0.0
Total solar energy transfer coefficient gtot 0.01 – 0.90*

* shutter from the outside with reference glazing type C according to EN14501:2005; detailed data depending on the color of the slats are given in the table on the website
Producer‘s website