Exterior Venetian Blinds C80 Selt

Application:
Exterior Venetian Blinds C80 was designed for use outside residential and office buildings.
Product characteristics:
– They are intended for external installation on window openings, facades and glazing, as well as indoors.
They limit the access of sunlight to the room.
– They increase the share of scattered light in the room.
– They protect the room from overheating, thereby contributing to improved thermal comfort in rooms.
– They allow you to reduce the costs related to air conditioning of rooms.
– Main rail casing with aluminum cover sheets in 4 types (1, 2, 3 and version 3A and 4 and version 4A), possible
flush-mounted construction.
– Option to create any number of modules.
– Strip guides made of extruded aluminum in several versions (single, double, flush-mounted, frame-mounted).
– Rolled holes in the slats protect the ribbons against abrasion.
– Smooth control of the slat angle allows for easy regulation of light intensity.
– Pins made of zinc and aluminum alloy.
– Polyester textile elements, thermally fixed, resistant to stretching, abrasion and UV rays,
– Ladders reinforced with aramid,
– They limit the penetration of noise into the building interior.
– They do not emit toxic substances during operation.
– C-shaped lamellas with rolled edges provide them with higher stiffness and durability.
– The noise emissions of motorized blinds and external blinds are not considered to pose a significant risk to health and safety.
– The motors have a housing protection class of IP 54. The design of the product and the drive allows the curtain to be safely stopped at any height in the up-down working area and remain suspended there.
– Up and down movement is done by electric switch or remotely by remote control.
– The covers of moving parts have been designed and manufactured in a way that ensures the safety of operators, assuming that they are used correctly.
– Electric or manual (crank) drive.
– Colors: RAL, FSM.

TECHNICAL PARAMETERS – Exterior Venetian Blinds C80 – Technical Data
Maximum width: 4.5 m
Maximum height: 5 m
Maximum area (for crank drive): up to 9 m2,
Slat width: 80.4 mm
Slat height: 12.4 mm
Lamella thickness: 0.4 mm
Height of cover sheets: 200, 250, 300, 340, 390, 440 mm
Width of cover sheets: 128 mm
Electric drive, engine with parameters:
– supply voltage
230 V ~ 50 Hz – power
from 93 W to 230 W (depending on the engine type)
– current consumption from 0.4 A to 1.0 A (depending on the engine type)
– protection level IP 44, IP54
– continuous operation time from 4 to 6 minutes
– torque from 6 to 20 Nm
– rotational speed from 24 rpm to 26 rpm (depending on the engine type)
– operating temperature From -10°C to + 40°C
Hand drive: Crank:
Length: 2/3 of the system
Construction color RAL, VSR, FSM
Outdoor use
DECLARED PERFORMANCE PROPERTIES (EXTERNAL) –
Declaration of Performance 72 / ŻF / 2018
Wind load resistance class 3 (150Pa)
Additional thermal resistance ∆R 0.0
Total solar energy transfer coefficient gtot 0.01 – 0.90*

* shutter from the outside with reference glazing type C according to EN14501:2005; detailed data depending on the color of the slats are provided in a table on the Manufacturer‘s website