Do you have any questions? Need help?Call us +48 518 075 074
Exterior Venetian Blinds C80L – is an external sunshade, mounted to the recess above the window, in which the raising and lowering of the slats, made of aluminum strips, is carried out using an electric mechanism with a drive system connected to the control device or manually activated using a mechanism with a crank. The slats are placed on cable guides.
See information about guide holders
See information about cover plates
Price Exterior Venetian Blinds C80L
1. Cover plate assembly
2. Side cover of the cover plate
3. Cable guide
4. Fixing the wall tensioner
5. Cable guide tensioner (wall-mounted)
6. C80 lower beam
7. C80 pen
– Pen profile
– Bottom beam profile
– Bottom beam cap
* Attention! Blinds with cable guides are made with slats whose width is 20 mm smaller than the given total width of the system. So as to minimize the possibility of the slats rubbing against the side walls during operation for recess installation.
H – Total height of the blinds
h – Height of the cover plate
Package height (from 190 to 440mm)
– Auxiliary handles 125-390mm
– Main sheet metal holder
– Main adjustable sheet metal handle
– Standard without additional handles on the main rail holder. Ceiling mounting on a standard bracket
– On additional main handles. Wall or ceiling mounting on a standard bracket attached to the main bracket of the cover sheet
As standard, blinds on cable guides use a standard handle (optionally, a spring handle can be used)
The blinds are controlled manually. The manual control side is selected when viewed from inside the room. When controlling external blinds from the room, a wall grommet is used.
The blinds can be controlled wired or wirelessly using an electric drive. The cable is approximately 2 meters long and located approximately in the center of the system. It can be connected either on the right or left side of the blind.
See information about drives See information about automation
Application:
The Exterior Venetian Blinds C80 L system is intended for external shading of window openings, facades and other large glazing.
Product characteristics:
– Designed for installation on window openings
– They limit the access of sunlight to the room
– They increase the share of scattered light in the room
– They protect the room from overheating, which contributes to improving the thermal comfort in the rooms
– They allow you to reduce the costs related to air conditioning of rooms
– They limit the penetration of noise into the building interior
– They do not emit toxic substances during operation
– The noise emission of a product with an electromechanical drive is less than or equal to 58 dBA
– The motors have a housing protection class of IP 44
– The design of the product and the drive allows the curtain to be safely stopped at any height in the up-down working area and remain suspended there
– The up and down movement and rotation of the slats is carried out using an electric drive or manually using a crank
– The electric drive can be controlled using a manual switch or remotely
– Smooth control of the slat angle enabling free adjustment of light intensity
– C-shaped slats with rolled edges for additional strength
– Rolled holes in the slats protect the ribbons against abrasion
– Pins made of zinc and aluminum alloy
– Textile elements made of polyester, double-aramid-reinforced, heat-set, stretch-resistant,
abrasion and exposure to UV rays
– Powder-coated structure
– Possibility of flush-mounted installation
TECHNICAL PARAMETERS – Exterior Venetian Blinds C80L – Technical Data
Maximum width: 3.5 m
Maximum height: 4 m
Slat width: 80 mm
Lamella height: 12.4 mm
Lamella thickness: 0.4 mm
Height of cover sheets: 200, 250, 300, 340, 390, 440 mm
Width of cover sheets: 128 mm
Electric drive, engine with parameters:
– supply voltage
230 V ~ 50 Hz – power
from 90 W to 230 W (depending on the engine type)
– current consumption from 0.4 A to 1.0 A (depending on the engine type)
– protection level IP 44, IP54
– continuous operation time from 4 to 6 minutes
– torque from 6 to 20 Nm
– rotational speed from 24 rpm to 26 rpm (depending on the engine type)
– operating temperature From -25°C to + 70°C
Hand drive: Crank:
Length: 2/3 of the system
RAL construction color
Outdoor use
DECLARED PERFORMANCE PROPERTIES (EXTERNAL) –
Resistance to wind load 1 class (50Pa)
The page concerns the facade blind C80L by Selt made to measure in accordance with the information provided during the order in the product configurator. More information can be found in the configurator or on other product subpages.
