Do you have any questions? Need help?Call us +48 518 075 074
Exterior Venetian Blinds Z90 Cube Selt is equipped with a square-section cassette made of extruded aluminum. The cassette supported on guides, which are the load-bearing element of the system, is ideal for installation on the facade of a building. All slats are profiled inward on both sides, which provides them with increased stiffness, and smooth control of the slat angle allows for free regulation of light intensity.
Price the Exterior Venetian Blinds Z90 Cube
1 – Cube cartridge assembly
2 – Side cover of the Cube cassette
3 – Strip guide (here: rectangular-cube)
4 – Wall mount
5 – Cassette wall mount (required for cassette width >3 m)
6 – Z90 lower beam
7 – Z90 pen
– Pen profile
– Bottom beam profile
Both guides are modular guides. There are no outermost guides as standard, because when using cube guides we use a cap on the outermost elements.
A. Cube guide inside the cover cassette
B. Cube guide on the outside of the cover cassette
There are two types of handles to choose from. Adjustable “longitudinal” handle (52-58mm adjustable) and “straight” fixed handle (with fixed handle length – to choose from – usually we use 57mm as standard).
Arrangement of handles when installing guides inside the cassette
TYPE A – Z90 in an oval/cube cassette with guides to the inside of the cassette
In this type of installation, one common cassette is used for several blinds, and the guides are mounted inside the system.
Side cover without a slot, used when mounting guides to the inside.
Every second slat is equipped with a pin. This causes the slats to move stably along the guides.
ATTENTION!
The maximum length of the cassette in one piece is 3 m (mounting the cassette only on the guides). In the case of additional mounting of the cassette, the maximum width of the cassette is 6 m.
TYPE B – Z90 in an oval/cube cassette with guides outside the cassette
In this type of installation, the supporting element of the structure are the guides that transfer the weight of the entire structure to the spacer brackets.
Side cover with a slot used when mounting guides outdoors.
Every second slat is equipped with a pin. This causes the slats to move stably along the guides.
The Cube facade blind can be controlled by an electric motor. In the case of an electric drive, the cable is approximately 2 meters long and located approximately in the center of the system. It can be connected either on the right or left side of the blind.
See information about drives
See information about automation
Application:
Exterior Venetian Blinds Z90 was designed for use outside residential and office buildings.
Product characteristics:
– They are intended for external installation on window openings, facades and glazing.
– They limit the access of sunlight to the room.
– They increase the share of scattered light in the room.
– They protect the room from overheating, thereby contributing to improved thermal comfort in rooms.
– They allow you to reduce the costs related to air conditioning of rooms.
– Main rail housing via extruded aluminum cassette.
– Easy increase of the basic height of the cassette with extruded walls (100 or 160 mm)
– Strip guides made of extruded aluminum.
– Option to create any number of modules.
– Possibility of installing guides inside or outside the side covers of the cassette.
– Z-shaped slats with rolled edges provide them with higher stiffness and durability and are larger
blackout.
– Profile that silences the system when closing the slats.
– Smooth control of the slat angle allows for easy regulation of light intensity.
– Pins made of zinc and aluminum alloy.
– Textile elements made of polyester, thermally fixed, resistant to stretching, abrasion and UV rays.
– Ladders reinforced with Aramid (Hagofix version) or Kevlar (Loop version).
– They limit the penetration of noise into the building interior.
– They do not emit toxic substances during operation.
– The noise emissions of motorized blinds and external blinds are not considered to pose a significant risk to health and safety.
– The motors have a housing protection class of IP 54. The design of the product and the drive allows the curtain to be safely stopped at
any height in the up-down work area and remaining suspended there.
– Up and down movement is done by electric switch or remotely by remote control.
– The covers of moving parts have been designed and manufactured in a way that ensures the safety of operators
assuming they are used correctly.
– Electric or manual (crank) drive.
– Colors: RAL, FSM.
TECHNICAL PARAMETERS – Exterior Venetian Blinds Z90 Cube – Technical Data
Maximum width: 4.5 m
Maximum height: 4 m
Maximum area: up to 9 m2,
Slat width: 93.2 mm
Slat height: 12.9 mm
Lamella thickness: 0.45 mm
Cover cassette height: 240, 330, 390 mm
Rear cassette width (+ rear mounting groove): 146 mm (+6.5 mm)
Electric drive, engine with parameters:
– supply voltage
230 V ~ 50 Hz – power
from 93 W to 230 W (depending on the engine type)
– current consumption from 0.4 A to 1.0 A (depending on the engine type)
– protection level IP 44, IP54
– continuous operation time from 4 to 6 minutes
– torque from 6 to 20 Nm
– rotational speed from 24 rpm to 26 rpm (depending on the engine type)
– operating temperature From -10°C to + 40°C
DECLARED PERFORMANCE PROPERTIES (EXTERNAL) –
Declaration of Performance 76 / ŻF / 2018
Wind load resistance Class 4 (250 Pa)
Additional thermal resistance ∆R 0.0
Total solar energy transfer coefficient gtot 0.01 – 0.90*
The page concerns Exterior Venetian Blinds Z90 by Selt in a Cube cassette made to measure in accordance with the information provided during the order in the product configurator. More information can be found in the configurator or on other product subpages.
z90 cube guides end caps, cross-section of Exterior Venetian Blinds Z guide, Exterior Venetian Blinds z90 components, cassette, main rail, aluminum guide, bottom beam, guide holder, z90 cube main rail holder , holder mounted to the cube cassette
